Anticondensation sheet Elkatek Silver – anticondensation / sheet for waterproofing.
It is used for hydroinsulation of inclined roofs as the anticondensation material. The internal side of the sheet is covered by humidity-absorbing layer, i.e. the sheet may absorb humidity from internal environment. If it is laid above the heating material, the air gap of 50 mm has to be left for ventilation.
| Parameters | Characteristics |
|
Composition |
Polypropylene: 86 g/m² Viscose fiber: 24 g/m² |
|
Length/ width/ amount in roll |
Min. 40 m / 1.5 (-0.5 %, + 1.5 %) m/60m² |
|
Weight of unitary area |
110 g (± 10 %) g/m² |
|
Inflammability |
F class |
|
Resistance to UV rays |
Up to 4 months |
|
Resistance to water penetration |
|
|
- before artificial aging |
W1 class |
|
- after artificial aging |
W1 class |
|
Resistance to stretching in longitudinal direction |
|
|
- before artificial aging |
(400 ± 10 %) N/50 mm |
|
- after artificial aging |
-20 % |
|
Resistance to stretching in cross direction |
|
|
- before artificial aging |
(350 ± 10 %) N/50 mm |
|
- after artificial aging |
-20 % |
|
Relative elongation in longitudinal direction |
|
|
- before artificial aging |
13 % |
|
- after artificial aging |
-20 % |
|
Relative elongation in cross direction |
|
|
- before artificial aging |
14 % |
|
- after artificial aging |
-20 % |
|
Permeability to water vapor |
sd = (40 ± 20 %) m |
It satisfies the requirements of the standard LST EN 13859-1:2005 + A1:2009 “Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing” and its supplement ZA.
Made in the EU.
G386 Diffusion tape with single-sided adhesive
G386 Diffusion tape with single-sided adhesive
