PE 110 NP 75 sq.m.

39.44€

Qty:

PE 110 NP – transparent reinforced sheet for waterproofing.
It is used for hydroinsulation of inclined roofs (protection against wind and water). If it is laid above the heating material, the air gap of 50 mm has to be left for ventilation.

Parameters	Characteristics
Composition	PP - Polypropylene material
Length/ width/ amount in roll	Min. 50 m / 1.5 (-0.5 %, + 1.5 %) m / 75 m²
Weight of unitary area	90 g (± 10 %) g/m²
Inflammability	F class
Resistance to UV rays	Up to 4 months
Resistance to water penetration
- before artificial aging	W1 class
- after artificial aging	W1 class
Resistance to stretching in longitudinal direction
- before artificial aging	(220 ± 10 %) N/50 mm
- after artificial aging	-30 %
Resistance to stretching in cross direction
- before artificial aging	(190 ± 10 %) N/50 mm
- after artificial aging	-30 %
Relative elongation in longitudinal direction
- before artificial aging	20 %
- after artificial aging	-20%
Relative elongation in cross direction
- before artificial aging	16 %
- after artificial aging	-20 %
Permeability to water vapor	sd = 1,4 m
Flexibility at low temperature	NPD

It satisfies the requirements of the standard LST EN 13859-1:2005 + A1:2009 “Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing” and its supplement ZA.

Made in the EU